Tricks that work to end slow WiFi on your mobile phone

Whether you have Android or iOS, you have it The mobile is in the latest version So that the device can manage the wireless connection in the best possible way and avoid some failures caused by security holes exploited by hackers.

Use a WiFi repeater

the Wi-Fi repeaters They do exactly what their name describes. They connect to the main access point, which is the router, wirelessly, and configure themselves as a new access point. That is, they take the WiFi from the router and create a new WiFi.

Therefore, it is crucial that the signal they take from the router is optimal; And again, a new coverage area will be created with very similar restrictions and idiosyncrasies. What a WiFi booster or repeater does is “take” your wireless connection and extend it until it reaches the exact room where it wouldn’t normally reach you. In this way, by receiving a better signal on your mobile phone, it can solve these slow problems.

Band change 2.4GHz or 5GHz

If we choose a file 5GHz band The signal will be weaker and reach fewer places, but this may be the better option, as it is the signal with the better speed of the two, as it is less sensitive to interference. We have to differ between the two bands, 2.4GHz and 5GHz, to be able to find out what works best for us, even in different devices.

In other words, our cellphone may work better in the room we sleep in at 5GHz, but in our roommate’s room it should. 2.4GHz band Because in this case it is the best.

Another advantage of the 5GHz band is that it has 25 non-overlapping channels by 14 of the 2.4GHz band and that can make a difference. But the big problem in the 5 GHz band, as we have already indicated, is the distance at which it can operate, that is, its range is less. This range is not recommended if you live in a duplex and want to get a good signal upstairs, because the normal thing is that 2.4G will get to you, but you won’t get 5G to work, at least not with it facilitated. Another thing is that you put one or two signal repeaters, in which case you have to configure them with 5 GHz.

Connect your mobile phone by cable

As it also happens in our computer, the reality is that using an Ethernet network cable is much faster than using a WiFi connection. Very straightforward. Which, as we can see, is a file WiFi makes us lose 65% of our average connection speed. The 100mbps average stays at around the real 36mbps, in the case of the 200mbps the averages are usually around 100mbps.

If you can, connect an Ethernet cable to your mobile phone and this will increase the speed and avoid the annoying interruptions that usually appear. For this you will have to use a USB-C to Ethernet adapter, as it does not have a specific port for connecting Ethernet.